Main Menu
User Login
User Name
Password

View By Hangar


View By Aircraft
Users Aircraft

Browse Images

Virtual Aerodrome Image Browser ( Small / Large ) Show : All | Parked | Flying | Build | Aerial | Reference
Page (44 in total) :  <<   12   13   14   15   16  [ 17 ]  18   19   20   21   22   >>  [ < Prev ] [ Next > ]
Hangar Aircraft Category Date Preview
David DuckettGuillows Series 800 - Sopwith CamelParked23-May-10 13:29
Views : 2739
Finished
David DuckettGuillows Series 800 - Sopwith CamelBuild21-May-10 18:13
Views : 2464
David DuckettGuillows Series 800 - Sopwith CamelBuild21-May-10 18:12
Views : 2468
5 more wires to finish the rigging. The doubled wires from the top of the outer struts to the bottom of the fuselage are .035", all others are .020". Easy!
David DuckettGuillows Series 800 - Sopwith CamelBuild21-May-10 18:09
Views : 1462
The prop halves were glued together with Testors plastic cement and Squadron white putty was used to seal and smooth the edges and Micro-Fill was used to finish the last small gaps. It was then painted with clear dope to make the plastic accept the acrylic paint more easily. The color is raw sienna with raw umber added to darken and when dry the dark color is brushed loosely and lightly over the base color creating streaks. It was then sprayed with Top Flite crystal clear.
David DuckettGuillows Series 800 - Sopwith CamelBuild21-May-10 18:01
Views : 1453
Old trick: outline the part with a pencil before cutting so it can be seen better.
David DuckettGuillows Series 800 - Sopwith CamelBuild21-May-10 17:59
Views : 1387
Cast with Micro-Mark resin using the kit plastic for molds
Hangar Aircraft Category Date Preview
David DuckettGuillows Series 800 - Sopwith CamelBuild18-May-10 20:00
Views : 1296
David DuckettGuillows Series 800 - Sopwith CamelBuild18-May-10 20:00
Views : 1202
These are also .020" wire. Cut and paste.
David DuckettGuillows Series 800 - Sopwith CamelBuild18-May-10 19:58
Views : 1338
Poppy said he used piano/music wire for rigging so...this is .020" wire. Bend a short length to 90* and insert in the hole made by a pin. Mark the length, I use paint, and cut. Lay wire on part and put a small drop of medium CA on it. Moral: Always trust your Poppy.
David DuckettGuillows Series 800 - Sopwith CamelBuild16-May-10 14:28
Views : 1222
David DuckettGuillows Series 800 - Sopwith CamelBuild16-May-10 14:28
Views : 1271
David DuckettGuillows Series 800 - Sopwith CamelBuild16-May-10 14:27
Views : 1284
The elevator control horns are made of 1/64" plywood
Page (44 in total) :  <<   12   13   14   15   16  [ 17 ]  18   19   20   21   22   >>  [ < Prev ] [ Next > ]
(c) 2010 www.VirtualAerodrome.com / James Good. All pictures are property of the individual members of this site.
They may not be used without permission from the user.