Browse Images

Virtual Aerodrome Image Browser ( Small / Large )

Hangar	Aircraft	Category	Date	Preview
pfinn	Dumas Kit #222, Fokker EIII	Build	21-May-09 02:28
Views : 6858
updated motor system: GB 5g 12 pole outrunner, Dualsky 6A ESC, 300mah 2s 25C 7.4v batt. GWS 5x3 @ 7.4v = 72g thrust. OA weight with alum motor mount and prop mount w/ O ring propsaver = 36g
Ceherald	Guillows Series 300 - Piper Cherokee	Parked	21-May-09 00:08
Views : 5268
"Cheap Inexpensive Acrylic Paints" that I use.
David Duckett	Dave Diels Engineering, Inc Kit #15, North American F-86D Sabre	Build	20-May-09 22:16
Views : 1336
...and allowed me more time to work on the covering.
jgood	Peck Polymers De Havilland DH-60 Gipsy Moth	Build	20-May-09 18:20
Views : 1374
Cowling on, and painted red (enamel). Will need another coat, I think.
jgood	Peck Polymers De Havilland DH-60 Gipsy Moth	Build	20-May-09 18:19
Views : 1349
Extra fillets added in to help in seating of the plastic cowling. The shape of the cowl was slightly off at the back, and this allowed the plastic to be cut away, exposing the wood of the fillets.
jgood	Peck Polymers De Havilland DH-60 Gipsy Moth	Build	20-May-09 12:15
Views : 1444
Cotton thread and CA holding the wire to the fuse.

Hangar	Aircraft	Category	Date	Preview
jgood	Peck Polymers De Havilland DH-60 Gipsy Moth	Build	20-May-09 12:15
Views : 1509
More sanding, and undercarriage wire bent into shape.
jgood	Peck Polymers Peanut Druine Turbulent	Flying	20-May-09 10:41
Views : 4735
On it's maiden flight, 15 seconds this morning. Will update with details a little later...
novice builder	Herr Engineering Ryan ST-A	Build	20-May-09 09:59
Views : 5306
Herr Beech Bonanza complete and ready to fly. Just waiting for elevatoranj to finish his plane (in background) so that we can have our flight competition. Wheels on my plane are removeable for flight. The only thing left for me to do is balance it.
jerry campbell	Dave Diels Engineering, Inc Kit #41, Mitsubishi J2M3 Radien "Jack"	Build	19-May-09 12:46
Views : 1195
The lower nose air intake is laminated together and then must be dug out and sanded to shape. The supplied balsa is good quality and the shaping and sanding went well.
jerry campbell	Dave Diels Engineering, Inc Kit #41, Mitsubishi J2M3 Radien "Jack"	Parked	19-May-09 12:42
Views : 1166
Once the wings are glued into place the lower stringers will be added.
jerry campbell	Dave Diels Engineering, Inc Kit #41, Mitsubishi J2M3 Radien "Jack"	Build	19-May-09 12:39
Views : 1140
With a little trimming the wings fit well.

All pictures are property of the individual members of this site.
They may not be used without permission from the user.